Illustra Flex Series Installation and Configuration Guide
48
8200-1456-01 D0
2
Select the
Picture Settings
tab from the
Basic Configuration
menu.
3
Select
to start the video stream if it is not already active.
4
Select the
Exposure Mode
from the drop-down menu:
•
P-Iris
•
Manual
Note:
Settings available depend on the Exposure Mode configuration you choose.
5
Select the
Exposure Method
from the drop-down menu:
•
Full Picture Weighted
•
Upper
•
Lower
•
Center Weighted
•
Spot
•
Left
•
Right
The default setting is center weighted.
6
Select the
Min Exposure
from the drop-down menu.
The default setting is 1/10000s.
7
Select the
Max Exposure
from the drop-down menu.
The default setting is 1/8s.
8
Select the
Exposure Offset (F-Stops)
from the drop-down menu.
The default setting is 0.
9
Select the
Max Gain
from the drop-down menu.
The default setting is 51db.
10
Select the
Frequency
radio button for either
50Hz
or
60Hz
.
The default setting is 60Hz.
11
Select or clear the check box for
Flickerless Mode
.
This feature is not selected by default.
• When you select
Flickerless Mode
, the minimum and maximum
exposure times are locked to 1/100 and 1/50 respectively (PAL) or
1/120 and 1/60 respectively (NTSC). This applies to all cameras ref-
erenced in this guide.
- End -
Procedure 39 Restore Exposure Defaults
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Settings
tab from the
Basic Configuration
menu.
3
Select
to start the video stream if it is not already active.
4
Select
Exposure Defaults
to restore the default settings.
