Ikegami HDK-790GX, Operation Manual

Page: 91 / 136

CAMERA SETTINGS and ADJUSTMENT
5
79
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
Note:
- When the new model name cannot be loaded from
the lens, “READ ERROR” appears on the bottom
instead of “COMPLETED”.
- When the MENU SELECT switch is turned to
switch the cursor on “CANCEL” to “CLR” and the
MENU SELECT switch is pressed in Step M2,
“COMPLETED” appears on the bottom.
Next, when “COMPLETED” disappears, the area to
display a model name automatically obtained from
the lens will be blank.
Note:
The lens name used for “AUTO SEL” can be edited so that the lens
¿
le can be shared with a similar lens.
The following explains the procedures.
E1
Follow Steps 1 to 3 of lens fi le creation to display the submenu.
E2
Turn the MENU SELECT switch to position the
cursor on “NUMBER”, and press the MENU
SELECT switch.
The registered lens numbers (NO. 1 to NO. 8) are
displayed.
E3
Turn the MENU SELECT switch to position the
cursor on the lens number of the fi le name to be
edited, and press the MENU SELECT switch.
The NO.5 lens set in “AUTO SEL” is selected here as
an example and the AUTO SEL NAME display part
displays “AB40X10 ABCD”.
▲
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＡＵＴＯ ＲＥＡＤ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＲＥＡＤ ＥＲＲＯＲ
When the new model
name cannot be
loaded
▲
▲
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＣＬＲ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＡＵＴＯ ＲＥＡＤ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＣＯＭＰＬＥＴＥＤ
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
（ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
Switch the cursor to
"CLR" and confirm.
"COMPLETED"
appears.
The area will be blank.
▲
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
（ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
Ｘ０．８ ＣＯＮＶ ＣＯＮＴ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
E②
Position the cursor on
"NUMBER" and
confirm.
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
E③
Select the target lens
number and confirm.