Ikegami HDK-790GX, Operation Manual

Page: 30 / 136

2.1 Camera and Viewfi nder
14
HDK-790GX 1403 VER1 (U)
Camera Rear View
ＳＴＢＹ
ＯＮ
INCOM-1 INCOM-2
CAMERA
CALL
RET-1 RET-2
1
2 3
4 1
2 3
4
PGM-1 PGM-2 PGM-1 PGM-2
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
RET-3
1
2 3
4
EXT
FOCUS
ASSIST FUNC
③ FUNC switch
④
RET SELECT switch
⑤ CALL button
⑨ INCOM2 connector
⑥ REAR TALLY lamp
⑦ INCOM2 MIC switch
① EXTENDER switch
⑧
INCOM2 MIC SELECT switch
② FOCUS ASSIST switch
REAR SCRIPT connector ⑪
INCOM1 connector ⑭
INCOM1 MIC switch ⑬
INCOM1 MIC SELECT switch ⑫
⑩ INCOM2 volume control knob INCOM1 volume control knob ⑮
① EXTENDER switch
Turns ON/OFF the lens extender.
② FOCUS ASSIST switch
Turns ON/OFF the FOCUS ASSIST. The switch lights up when it is ON.
The intensity of light can be changed with the REAR TALLY switch on the rear control panel.
Caution:
If the REAR TALLY switch is set to OFF, the light does not turn on even when the FOCUS ASSIST function is turned ON.
③ FUNC switch
Turns ON/OFF the functions assigned in the menu. The switch lights up when it is ON.
The intensity of light can be changed with the REAR TALLY switch on the rear control panel.
Caution:
If the REAR TALLY switch is set to OFF, the light does not turn on even when the FUNC function is turned ON.
④ RET SELECT switch
Selects the RET signal to be output on the view
¿
nder.
RET-1 : Outputs the Return video-1 signal.
RET-2 : Outputs the Return video-2 signal.
RET-3 : Outputs the Return video-3 signal.
RET-1 selector switch : A switch used to select one of the return video signals as the RET-1 signal from the four lines that are
connected to CCU.
RET-2 selector switch : A switch used to select one of the return video signals as the RET-2 signal from the four lines that are
connected to CCU.
RET-3 selector switch : A switch used to select one of the return video signals as the RET-3 signal from the four lines that are
connected to CCU.
When all return signals are selected simultaneously, the signals are output in the following sequence: RET-1 > RET-2 > RET-3.
⑤
CALL button
A button used to call VE (Video Engineer). When this button is pressed, the RED TALLY indicator on the CCU and control panel
lights up and buzzer sounds.