Ikegami HDK-790GX, Operation Manual

Page: 62 / 136

50
HDK-790GX 1403 VER1 (U)
4.2 Switch Position Check
4.2 Switch Position Check
When the camera is used for the
¿
rst time, set the switches on the camera to the positions indicated in the
¿
gures below, and ensure
that the camera works properly. Once set, these switches do not have to be set again unless required. This section explains a camera
system connected to the CCU.
---
Camera inside the right side plate
- HEAD POWER switch : ON
---
Camera control panel
- FRONT TALLY switch : ON
- VF MARKER switch
: ON
- CHARACTER switch : ON
- CURSOR switch : OFF
- LAMP switch : ON
Note:
The FILTER local indicator lights up when the CCU is
connected, and the camera has an operation right for the CC
FILTER switch and ND FILTER switch.
Pressing the FILTER HEAD switch will switch the operational
priority between the camera and CCU.
Caution:
If the REAR TALLY switch is set to OFF, the light does not turn
on even when the FOCUS-ASSIST function / FUNC function is
turned ON.
---
Rear view Camera INCOM panel
- INCOM-1 MIC switch : ON
- INCOM-2 MIC switch : ON
---
Camera Right View MIC AMP (option)
- MIC-1 POWER switch
- MIC-2 POWER switch
Depending on the type of microphone to use, the power supply
settings differ.
Switch Position Description
AB+12V Su12V AB power to the microphone.
OFF Supplies no power to the microphone. Applicable for a dynamic
microphone or a microphone with built-in power supply which
requires no power supply.
P.+48V Su48V Phantom power
Reference:
For details on the microphone, refer to the instructions accompanying the microphone to be used.
HEAD POWER switch
E D C B A 5 4 3 2 1
OFF
ON
MENU ON
OFF
ON
OFF
DIM
ON
OFF
DIM
ON
ON
BOX
OFF
CROSS
BOX
OFF
CROSS
SLOW
AUTO
FAN
HEAD
ND EFFECT ECC
FILTER
VF DTL
VF IND
SIZE POSITION
CURSOR
VF
(PUSH SET)
MENU SELECT
CHARACTER
MARKER
VF
LAMP
REAR
TALLY TALLY
FRONT
STBY
ON
CAMERA
FRONT TALLY switch
CHARACTER switch
VF MARKER switch
LAMP switch
REAR TALLY switch
CAMERA control panel
CURSOR
switch
INCOM-1 INCOM-2
PGM-1 PGM-2 PGM-1 PGM-2
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
INCOM-1 MIC switch INCOM-2 MIC switch
MIC-1 POWER
switch MIC-2 POWER
switch