Ikegami HDK-790GX, Operation Manual

Page: 52 / 136

3.2 Camera and Peripheral Installation and Connection
40
HDK-790GX 1403 VER1 (U)
Connecting the Microphone
This product is equipped with two microphone channels (MIC-1 and MIC-2). Select them depending on the operating conditions.
The MIC AMP module is optional.
1
Connect the microphone connector to MIC-1 or
MIC-2 connector.
2
Switch the power supply for the microphone.
Set the MIC-1 or MIC-2 POWER switch according to
the power supply method of your microphone.
See the user's manual of your microphone for details on
the microphone.
AB+12V : For a microphone that re12V AB
power supply
OFF : For a dynamic microphone or other type
of microphone that does not require power
supply
P.+48V : For a microphone that re48V
phantom power supply
Reference:
Set the GAIN setting for the microphone ampli
¿
er by
the menu operation.
See “Chapter 5. Setting with menu functions” for the setting menu.
MIC-1
MIC-2
Latch lever
Microphone connector
Microphone
MIC-2 connector
MIC-1 connector
MIC-1
MIC-2
Cover
MIC-2 POWER switch
MIC-1 POWER switch