Ikegami HDK-790GX, Operation Manual

Page: 101 / 136

TR
OUBLE SHOO
TING and MAINTENANCE
6
6.1 Alarm Lamp on the OCP or MCP Flashes ON and OFF
89
HDK-790GX 1403 VER1 (U)
Refer to this chapter when the alarm lamp lights or when you want to know about the maintenance during the use of this product.
---
Problems
- The alarm lamp on the OCP or on the MCP
À
ashes ON and OFF.
- “TEMP!!” or “FAN!!” appears on the view
¿
nder screen.
---
Questions
- How to reset the settings to default (Return to the factory settings)
---
Maintenance
- Cleaning the camera connectors
- Resetting the breaker
6.1 Alarm Lamp on the OCP or MCP Flashes ON and OFF
The CCU is equipped with a self diagnostic function which monitors whether the CCU and camera are running normal. As soon as
the CCU main power switch is turned ON, the self diagnostic function starts running, and always runs during operation.
If the CCU or camera becomes abnormal, the diagnostic function immediately detects the abnormality, and the ALARM indicator
on the OCP or MCP
À
ashes ON and OFF. Furthermore, the self diagnostic information screen appears on the PM, so that you can
locate the trouble point.
Note:
Even if the ALARM indicator does not
À
ash, you can check whether CCU and camera are running normal by pressing the PM IND/
PAGE button on the OCP or on the MCP to display the self diagnostic screen on the PM.
O C P - 2 0 0
CAM PWR VF PWR
STANDARD
INFO OPE SETUP
KNOB
FREE
HEAD POWER
OPT
CABLE
MAINTE USER WFM/PM
W U M S O I
TALLY AWB ABB
CAP BARS CAL AWB ABB
PM IND
/ PAGE
PANEL
ENABLE
OFF
HEAD CCU
OPEN SHORT
ALARM CALL
PED
PREVIEW
FULL RELATIVE
LENS EXT
IRIS
RANGE SENS
CLS OPEN ±1 ±2
R G B Y
SEQ
MIX
SUP
OCP MCP
PM IND/PAGE
button
ALARM
indicator
For the list of self diagnostic information of CCU-970, refer to the relevant operation manual. Perform the appropriate action
referring to the list.