Ikegami HDK-790GX, Operation Manual

Page: 20 / 136

1.1 Features of This Product
4
HDK-790GX 1403 VER1 (U)
Pursuit for Superb Operation and Ease of Use
---
Application of Conventional Standard 2/3-inch Lenses
As the lens mount, BTA S-1005B is used. You can use not only HD lenses but also SD
camera lenses for SDTV portable cameras as they are.
---
High Performance Viewfinders
You can select from 9-inch LCD color V or 7-inch HD CRT B/W VF.
---
Low Center of Gravity
The operability for the camera operator is improved by the design with making the
view
¿
nder position close to the optical axis and reducing the overall height to lower its
center of gravity.
---
On-Line Diagnostics
An on-line diagnostic system enables monitoring the status of circuits including video,
control,
¿
ber optic transmission, pulses and power supply. This enables you to always grasp
the status information of the camera.
---
Rotating Camera Cable Connection
Employs a rotating
¿
ber camera cable connector. This enables studio shooting and
¿
eld
shooting at various angles.
---
Return Switch
The rear operation panel has RET-1, RET-2, and RET-3 as part of standard equipment. This
allows you to switch easily between various RET signals.
Equipped with Various Interfaces
- The camera includes HD-SDI signal output.
- The camera has an interface for return video in HD-SDI signal form. (RET HD-SDI signal
transmission)
- When the camera is connected to the CCU-970, you can use the data trunk channel (RS-422)
for virtual studio applications.
- An 8-core composite
¿
ber optic camera cable (two single-mold
¿
bers, four power
leads, two control signal leads) connects between the camera and the CCU-970, and the
transmission complies with BTA S-004A (Japan standard) and SMPTE292M (International
standard). The distance of signal transmission and power supply allows up to 2,000 m
by multiple connections (up to 12 connections) of composite
¿
ber optic cables (9.2 mm
diameter).
- It is possible to supply the AC power as UTILITY power output. (200 VA Max.)
Support Function for Data Setup
The level adjustment and settings of each menu for the camera can be easily set up by
calling up the ENGINEER SET FILE that is set by user engineer or the FACTORY SET
FILE that is set at shipment according to environment or shooting conditions where the
camera system is used. This enables to initialize the camera status quickly even though the
settings are changed due to causes such as wrong operation of the menu.
Reference:
See “6. TROUBLE SHOOTING
and MAINTENANCE
[Initializing the Settings of this
Product]”
for the ENGINEER
SET FILE and FACTORY SET
FILE.