Ikegami HDK-790GX, Operation Manual

Page: 64 / 136

52
HDK-790GX 1403 VER1 (U)
4.3 Turning ON Power
2
Make sure that the ALARM indicator on the OCP or MCP is not fl ashing.
When the camera self-diagnosis function detects errors, the ALARM indicator
À
ashes, and the self-diagnosis information
will be displayed for 20 seconds.
O C P - 2 0 0
CAM PWR VF PWR
STANDARD
INFO OPE SETUP
KNOB
FREE
HEAD POWER
OPT
CABLE
MAINTE USER WFM/PM
W U M S O I
TALLY AWB ABB
CAP BARS CAL AWB ABB
PM IND
/ PAGE
PANEL
ENABLE
OFF
HEAD CCU
OPEN SHORT
ALARM CALL
PED
PREVIEW
FULL RELATIVE
LENS EXT
IRIS
RANGE SENS
CLS OPEN ±1 ±2
R G B Y SEQ
MIX
SUP
OCP MCP
PM IND/PAGE
button
ALARM indicator
Note:
You can display the self-diagnosis information and check the status by pressing the PM IND/PAGE button even when the ALARM
indicator is not
À
ashing.
---
To Control Power ON/OFF from OCP
It is possible to use the OCP to control the camera power source.
When the CAM POWER switch of OCP has been turned ON/OFF, only the camera power supply is turned ON/OFF. The CCU
power supply is not turned ON/OFF.