Ikegami HDK-790GX, Operation Manual

Page: 77 / 136

CAMERA SETTINGS and ADJUSTMENT
5
5.1 Settings Using Switches on the Camera
65
HDK-790GX 1403 VER1 (U)
5.1 Settings Using Switches on the Camera
Adjusting Headset Volume
This chapter explains how to control the headset volume.
Caution:
Do not set the INCOM-1 control knob, INCOM-2 control knob, INCOM-1 PGM-1/2 control knob, and INCOM-2 PGM-1/2 control
knob to near maximum level from the beginning. Setting the volume level too high with the intercom headset on your ears may
damage your eardrums. If you suddenly set the volume level too high, it may also damage the headset. Excessive sound pressure from
the headset may cause a hearing loss.
INCOM-1 INCOM-2
PGM-1 PGM-2 PGM-1 PGM-2
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
MIC
INCOM MIC SEL
ON
OFF
PTT
PROD
BOTH
ENG
INCOM-1 MIC switch INCOM-2 MIC SELECT switch
INCOM-2 MIC switch INCOM-1 MIC SELECT switch
INCOM-2 INCOM control knob
INCOM-2 PGM-2 control knob
INCOM-2 INCOM connector
INCOM-2 PGM-1 control knob
INCOM-1 INCOM control knob
INCOM-1 PGM-1 control knob
INCOM-1 INCOM connector
INCOM-1 PGM-2 control knob
---
Adjusting Intercom Volume
The intercom receiver can be adjusted on the rear side of the camera.
1
Turn the INCOM-1 control knob and INCOM-2 control knob on the rear of the camera to adjust the volume.
Caution:
Be sure to adjust the volume to the appropriate level while listening to sound through the headset. ---
Adjusting Intercom PGM Volume
The intercom PGM volume can be controlled on the rear side of the camera.
1
Turn the INCOM-1 PGM-1/2 control knob and INCOM-2 PGM-1/2 control knob on the rear of the camera to
adjust the volume.
Caution:
Be sure to adjust the volume to the appropriate level while listening to sound through the headset.