Ikegami HDK-790GX, Operation Manual

Page: 87 / 136

CAMERA SETTINGS and ADJUSTMENT
5
75
HDK-790GX 1403 VER1 (U)
5.2 Settings from the Menu
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
CUSTOM GAMMA DATA
||
― EASY MODE
Easy creation mode. Sets various parameters and creates the
custom gamma data.
||
||
|
|
||
||
― DEFAULT RESET ---
READY, EXECUTE,
CANCEL
Returns to the original custom gamma data.
If you have saved the custom gamma data with the “SAVE”
function, it returns to the saved data.
The original data cannot be recovered once it is overwritten
with the “SAVE” function.
- -
|| ||
― SELECT NORMAL
NORMAL, CINE1 to 2,
CUSTOM1 to 5
Selects the gamma table to be created. - -
| |
―
CURVE TYPE --- NORMAL, LOG, SPECIAL Sets the basic properties of gamma curve. -
*5
-
|| ||
― INITIAL GAIN --- 1.0 to 9.0
Sets the slope of gamma curve at around 0%.
The curve rises steeply as the value increases.
- *5 -
|| ||
― 18% GRAY --- 14.0% to 107.0%
Sets what level it should be after the gamma has been
applied when converting from 18% level before applied.
- *5 -
|| ||
― DYNAMIC RANGE --- 100% to 600%
Sets the maximum level (the maximum input level to the
gamma) before the gamma has been applied.
-
*5
-
| |
― WHITE LIMIT --- 70% to 109% Sets the white clip after the gamma has been applied. - *5 -
||
|
||
| ― CAL OFF
OFF, CAL100%,
CAL200%, CAL300%,
CAL400%, CAL600%
Selects the test waveform (CAL) to check the gamma table. - -
||
||
|
|
― SAVE ---
READY, EXECUTE,
CANCEL
Saves the data that has been created.
The data is temporary unless you save it.
Therefore, the data will be cleared if you end the menu
without saving it.
- -
|
―
SHUTTER OFF OFF, PRESET, VARIABLE Selects for the electronic shutter. - -
||
|
―
SHUTTER SPEED 1/100
PRESET:1/100 to 1/2000
VARIABLE:
1/63.4 to 1/1983
Switches the shutter speed.
(When SHUTTER is in PRESET and VARIABLE only.)
- -
||
― GAMMA CURVE COPY ---
CUSTOM1 to 5
ĺ
CUSTOM1 to 5
Copies the gamma data that has been created into the other
data in the camera.
- - |
― SD MEMORY CARD
- -
|
― SAVE --- --- Saves the custom gamma data in an SD card. - -
|
― LOAD --- --- Loads the custom gamma data from an SD card. - -
PRESET FILE LOAD
Function to load the user settings (ENGINEER SET FILE)
or factory settings (FACTORY SET FILE) for the level
adjustment or menu of the camera.
Used to return the camera state back to the previous or
initial settings.
|
|
―
FILE SELECT ENGINEER ENGINEER, FACTORY
ENGINEER : Initializes the state back to the user setting.
FACTORY : Initializes the state back to the initial factory
setting.
- -
|
―
LOAD START READY READY, START, CANCEL Executes initialization. - -
*3 : No. 2 of S11 on the MPU module must to be “ON” when creating the reference
¿
le.
Make sure to turn off the camera when selecting the switch.
Make sure turn off No. 2 of S11 after creating the reference
¿
le.
It is not necessary to turn on this switch when creating the reference
¿
le from the control panel.
*4 : If the manual set value is set with the control panel, the variable value can change with the manual set value.
Ex.) The value varies between -50 and +50 in the menu when the manual set of the GAIN is set at 50.
*5 : CUSTOM GAMMA MODE - Loads the custom gamma data from SD card through the LOAD menu.
---
MENU (4/4)
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
DIGITAL EXTENDER MODE
|
― DIGITAL EXTENDER
OFF OFF, ON Selects ON/OFF for the digital extender. -
|
― MAGNIFICATION x1.5 x1.5, x2, x3, x4 Selects the magnification of the digital extender. -
||
― HEAD SW CONTROL
ENABLE ENABLE, DISABLE
Sets whether to allow or restrict the digital extender control
from the rotary encoder switch on the camera.
-
|
|
― PUSH SET SW ON/OFF ON/OFF, MAG
Sets whether to have ON/OFF option only or to include
a control option for the magnification when the digital
extender is controlled from the switch on the camera.
-
MENU MODE
|
|
― ENGINEER MENU OFF OFF, ON
If set to ON, possible to display engineer menu.
If the camera power is turned OFF, this menu setting returns
to OFF.
- -