Ikegami HDK-790GX, Operation Manual

Page: 21 / 136

OUTL
INE
1
5
HDK-790GX 1403 VER1 (U)
1.2 Operating Systems
1.2 Operating Systems
This product is equipped with interface functions with a control panel and control unit.
It supports various operation forms in the studio or
¿
eld as a system camera with the
combination of CCU-970.
Each control panel to be connected to the CCU can be selected and operated depending on
the use.
---
Example of Minimum Configuration of System Camera (1 camera, 1 OCP, 1 MCP)
Camera Head
CCU
PM
WFM
PM
WFM
COMM
PM
WFM
WFM CONT
OCP
MCP
EXTERNAL
POWER
DC 12V
AC
---
Example of System Camera Configuration (Up to 8 cameras, 1 MCP)
Camera Head
CCU-1
CSU
OCP
PM WFM
PM
WFM
COMM
CCU-8
PM, WFM, COMM
WFM, COMM
PM
WFM
CONT
CCU-1
CCU-8
IN
OUT
PM WFM
PM
WFM
WFM CONT
COMM
MCP
Note:
For Minimum operating System,
no MCP needed when OCP-200
is used.
When any MCP other than
MCP-200 is used, EXTERNAL
POWER is not necessary, and
the CP cable length is 300m at
the maximum.
Term:
OCP (Operation Control
Panel)
This control panel is used for
normal operation. Typically one
OCP is dedicated to one camera
chain.
Term:
MCP (Maintenance Control
Panel)
This control panel is used for
the maintenance and precise
adjustment of the camera in
studio shooting. By using a
memory card, you can save the
shooting condition on memory
and make setup easily. By
using a CSU together with an
MCP, you can maintain up to 32
cameras.
Term:
CSU (Camera Select Unit)
Used when controlling multiple
cameras. With using a MCP,
one CSU can control up to 8
cameras, and contains terminals
through which video is output
on the monitor from the selected
camera.