Ikegami HDK-790GX, Operation Manual

Page: 29 / 136

NAME and F
U
N
C
T
IO
N
2
2.1 Camera and Viewfi nder
13
HDK-790GX 1403 VER1 (U)
① FRONT TALLY lamp
FRONT TALLY lamp lights up when the RED TALLY (On Air Tally) signal is input.
It also lights up when the CALL button is pressed on the CCU or control panel.
② LENS LOCK lever
After installing the lens to the camera, secure the lens with a lens
¿
xing knob.
③ Cable hook
Hook the camera cable on the cable hook to secure it.
④ CAMERA connector
Connect the camera and CCU with a
¿
ber cable. It supports connectors of LEMO 3K series
and Tajimi OPS series.
⑤ HD SDI OUT connector
This is an output connector for the HD SDI signal. It can be treated as a main line signal for
the self-contained operation and a MON OUT signal for the CCU operation.
⑥ LENS connector
Connect with the connector on the lens side when installing the lens.
⑦
Lens mount
You can use various 2/3-inch broadcast lenses. The BTA mount system is equipped as a
standard lens mount.
2.1 Camera and Viewfi nder
This section explains the names and functions of the parts on the camera and view
¿
nder.
Camera Front View
3G/SDI OUT
OPT
①
FRONT TALLY lamp
③ Cable hook
② LENS LOCK lever
Lens mount
⑦
LENS connector ⑥
CAMERA connector
④
HD SDI OUT connector
⑤
Reference:
See “Safety Cautions” for the
routing and
¿
xing methods of
¿
ber cables.
Reference:
See “7. Specifi cation [7.4.
External connection
connector]”
for pin functions of
lens connector.