IGBT D
IMMER
R
ACKS
Installation
& Operation
13
M
OUNTING
S
EVERAL
R
ACKS
T
OGETHER
If racks will be bused, please see "Busing Racks" on page 17
before mounting.
Racks may be bolted together.
1. Remove the four bolt-through knockouts (two at top, two
at bottom, front and back - see
Figure 12
).
2. If you plan to run control cables from rack to rack, remove
the necessary knockouts before bolting the racks together
(see
Figure 20
on page 22).
3. Bolt adjacent racks together using 3/8-16 UNC x 5/8" bolts
and locking nuts.
Mounting the Rack (continued)
Figure 12: Side Knockout Placement
Bolt-through knockouts
Bolt-through
knockouts
Control
wiring
knockout
