12
IGBT D
IMMER
R
ACKS
Installation
& Operation
Warning!
Capio Plus IGBT Dimmer Racks utilize dangerous voltages. Installation should be performed by trained per-
sonnel only. To prevent electrical shock, turn off power at fuse box before proceeding.
: This product is intended for installation in accordance with the National Electrical Code® and local or Federal
code specifications. To ensure full compliance with all codes and regulations, check with your local electrical inspector prior to
installation. To prevent electrical shock, turn off power at fuse box before installation.
: To reduce the risk of fire or shock hazard, DO NOT expose this equipment to rain or other moisture.
S
ECURING
R
ACK
T
O THE
W
ALL
(
OPTIONAL
)
If racks will be bused, please see "Busing Racks" on page 17
before mounting.
1. Mark hole placement on back of rack (placement at
installer’s discretion - see Figure 11).
2. Drill through back of rack.
3. Attach to wall with 3/8" or larger lag bolts.
Mounting the Rack
Figure 11: Suggested Hole Placement For Wall Mounting
Locate optional wall mount holes
in approximate locations shown
