52
IGBT D
IMMER
R
ACKS
Installation
& Operation
Appendix B: Specifications (continued)
C
APIO
P
LUS
R
ACK
C
ONTROL
M
ODULE
(ILSCPRCM)
Physical
:
3.75 inches high x 12.313 inches wide x 6.125 inches deep
(9.525 cm H x 31.275 cm W x 15.558 cm D)
0.58 pounds (0.263 kg)
Control Wiring
:
The standard control interface to the rack is a 10 BASE-T Ethernet connection running a TCP/IP based protocol. Each RCM includes
two permanently mounted RJ-45 jacks for the incoming Ethernet control cable. Standard Category 5 jumpers are used to distribute con-
trol signals within the rack.
The RCM also accepts DMX512 input using two optically isolated, permanently mounted 5-pole screw terminal blocks. Loop through
connections are also provided.
C
APIO
P
LUS
D
IMMER
R
ACK
M
ODULES
CP20HP: Capio Plus High Performance Dual 20A IGBT Dimmer Module (800 us) 2.75 pounds ( 1.247 kg)
CP15HP: Capio Plus High Performance Dual 15A IGBT Dimmer Module (800 us) 2.75 pounds ( 1.247 kg)
CP50: Capio Plus High Performance Single 50A IGBT Dimmer Module (800 us) 2.75 pounds ( 1.247 kg)
CP20ND: Capio Plus High Performance Dual 20A Non-Dim Module 2.75 pounds ( 1.247 kg)
CP15ND: Capio Plus High Performance Dual 15A Non-Dim Module 2.75 pounds ( 1.247 kg)
CP20CC: Capio Plus Dual 20A Constant Circuit Module 2.75 pounds ( 1.247 kg)
CP15CC: Capio Plus Dual 15A Constant Circuit Module 2.75 pounds ( 1.247 kg)
CP20HDF: Capio Plus Power Spec HDF Fluorescent Single 20A Dimming Module 2.75 pounds ( 1.247 kg)
CPBLANK: Blank Module (1.5 inches high x 12.313 inches wide x .375 inches deep)
Physical
:
All modules (excluding Blank Modules) have the following dimensions:
1.5 inches high x 12.313 inches wide x 6.125 inches deep
(3.81 cm H x 31.433 cm W x 15.558 cm D)
Electrical
:
Each dimmer module contains two circuit breakers (one for single circuit) and has an AIC rating of 10,000.
Dimmer electronics shall be completely solid state.
The dimmers shall be immune from damage caused by output short-circuits between load and neutral or load and ground.
