IGBT D
IMMER
R
ACKS
Installation
& Operation
33
Configuring RCM Using Guardian (continued)
Power-Up Preset
On power-up select preset - Select one of the eight available Local Presets to come on automatically when the system is turned on. This
is extremely useful during construction when the control console in normally not available.
If no input hold preset for - Set the amount of time that the selected Local Preset will stay on before it automatically fades to zero.
Clear Preset
Select which inputs will override the power-up preset.
Send data on this page
Unlike the other configuration pages, the data on this page is only sent to the system when this button is pressed.
D
IMMER
S
ETUP
Changes to the Dimmer Setup can only be made while in the Administrative Mode. Refer to "Administrative Mode" on page 40. Select
the required RCM from the RCM list at left and use the Dimmer Setup tab to configure.
Column Heading
Clicking on any column heading will sort the list (ascending or descending) by the selected column.
Shift and Control Keys
Use the Shift Key to select a consecutive group of dimmers.
Use the Control Key to add dimmers to the selection.
Right click for Select All.
Slot
The slot number starting from the left in a Capio Plus System.
Left dimmer is OK
Right dimmer is OK
Left dimmer is not reporting any data (offline)
Right dimmer is not reporting any data (offline)
Left dimmer is reporting an error
Right dimmer is reporting an error
Circuit
The circuit number of each dimmer in the system.
