IFM AC412S, Device Manual

Page: 126 / 242

SmartPLC SafeLine with PROFIBUS slave interface
126
7.7.3 Safety: Local IOs
42247
The [local IOs]menu page provides access to information about the switching states of the local inputs
and outputs.
>
Display the switching states of the local inputs
42232
To display the switching states of the local inputs:
1 Select menu page
► >
►
Select [Local inputs] tab.
2 Display switching states of the local inputs
> Menu page shows the following information:
Legend:
Switching states of the local inputs
(→
Switching states of the inputs: Colour codes +
symbols (→ S. 127 ))
Switching states of the logical devices of the local
inputs
(→ Switching states of the logical devices: Colour
codes + symbols (→ S. 127 ))
Text field with status information of the marked input
The switching states of the local inputs are only displayed if the safe application is in the
RUN mode.
The switching states may be displayed although no safe configuration is stored on the device
(
→ Display status information of the fail-safe PLC
(
→ S.
131 )).
The displayed data is invalid in this case.
► Select the required symbol with [  ] / [  ].