IFM AC412S, Device Manual

Page: 149 / 242

SmartPLC SafeLine with PROFIBUS slave interface
149
9.4.1 OSC: Display current messages
42311
The [Current] tab lists all current messages. The messages are in chronological order. Alle messages
regarding warnings and errors are displayed.
Under [Current] only messages will be displayed, that are created in the non-safe part of the
AC412S. Messages created in the safe part of the AC412S are only displayed in the
message history (
→ OSC: Show message history
(
→ S.
150 )).
Information about the different types of messages:
→ Message types
(
→ S.
147 )
Overview of possible OSC messages of the device:
→ OSC messages
(
→ S.
221 )
To view the error messages that are currently active:
1 Select the menu page
► On the start screen: Select [OSC] function key.
►
Select [Current] tab.
2 Show current messages
> The page shows the error messages that are currently active.
► Press [  ] to select the message field.
> The focus (orange frame) is on the message field.
► Use [  ]/[  ] to go through the error messages.
3 Optional: filter messages
►
Set the following parameters as required:
Parameter
Description Possible values
[Filter]
System component the
message was created in [All] Display all messages in chronological order of their
occurrence (= preset).
[AS-i 1] Display messages that were created in AS-i master
1.
[AS-i 2] Display messages that were created in AS-i master
2 (only selectable for devices with 2 AS-i masters).
[System] Display messages that were created in the system.
> Page shows filtered messages.