IFM AC412S, Device Manual

Page: 87 / 242

SmartPLC SafeLine with PROFIBUS slave interface
87
Change the Extended ID1 of the AS-i slave
41601
To set the Extended ID1 of an AS-i slave:
1 Select the menu page
►
> or >
► Select an AS-i slave (→ Slave selector (→ S. 54 )).
► Select [Setup] tab.
2 Set the Extended ID1
> The [ID1] list displays the current Extended ID1 value (hexadecimal format).
► Select the desired value for Extended ID1 from the [ID1] list.
> Selected value is applied.
After changing the Extended ID1, the existing configuration no longer corresponds to the
stored configuration:
>
An error message appears (configuration error).
► Start a projection adaptation (→ Carry out a projection adaptation
(
→ S.
79 )).