![background image](http://html1.mh-extra.com/html/ifm/ac412s/ac412s_device-manual_3900860217.webp)
SmartPLC SafeLine with PROFIBUS slave interface
217
Alarm data in the diagnosis alarm block
41530
>
Device diagnosis (alarm data byte 5)
41580
Byte no.
Bit
7
6
5
4
3
2
1
0
5
--
--
--
--
PS
A
OT
ISE
Legend:
Alarm
Description
MA
manual mode active
manual mode for output access is active
ISE
internal system error
internal device system error
OT
over temperature
temperature inside the device has exceeded the permissible max.
temperature value
PS
PLC stop
the PLC was stopped (available only for devices with PLC)
>
AS-i diagnosis (alarm data bytes 6...9)
41542
Byte no.
Bit
7
6
5
4
3
2
1
0
6
M1-PF19
M1-PF22.5
M1-EF
M1-S0
M1-PM
M1-IME
7
-
M1-DAE
M1-PE
M1-CEIP
M1-CEAS
M1-CEMS
8
M2-PF19
M2-PF22.5
M2-EF
M2-S0
M2-PM
M2-IME
9
-
M2-DAE
M2-PE
M2-CEIP
M2-CEAS
M2-CEMS
Legend:
M1 ... AS-i Master 1
M2 ... AS-i Master 2
Alarm
Description
CEAS
configuration error
– additional slave
AS-i configuration error: One or several slaves are available but not
projected.
CEIP
configuration error
– invalid profile
AS-i configuration error: The slave profiles of one or several slaves
differ from the projected slave profiles.
CEMS
configuration error
– missing slave
AS-i configuration error: One or several slaves are projected but not
available.
DAE
duplicate address error
One or several multiple-addressing faults occurred.
EF
earth fault
Earth fault was detected.
IME
internal master error
Internal system error of an AS-i master
PE
periphery error
One or several AS-i slaves have a periphery error.
PF19
19 V AS-i power fail
Failure of the Power24 supply was detected.
PF22.5
22.5 V AS-i power fail
Failure of the classic ASi power was detected.
PM
projection mode
AS-i master was set to the projection mode.
S0
slave 0 detected
New slave 0 was detected.
>
List of missing slaves (alarm data bytes 10...25)
41744
List of missing slaves causing a configuration error.
If at least 1 bit is set in this list, CEMS is also set.