IEI Technology PPC-3708, User Manual

Page: 66 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
Step 5:
Connect the IDE ribbon cable and power cable from the connectors on the
motherboard to the rear of the CD drive.
Step 0:
3.9 Mounting the System
WARNING!
When mounting the flat panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the installation
to make sure the flat panel PC does not fall down and get damaged.
The four methods of mounting the flat panel PC are listed below.
Wall mounting
Panel mounting
Arm mounting
Rack mounting
The four mounting methods are described below.
3.9.1 Wall Mounting
To mount the PPC-3708/PPC-3710/PPC-3712 flat panel PC onto a wall, please follow the
steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four bracket screw holes on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
Figure 3-20
).
Page 66