IEI Technology PPC-3708 User Manual Download Page 55

Page: 55 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

JP2 DESCRIPTION

1-2 closed

RS232 (default)

3-4 closed

RS422

5-6 closed

RS485

Table 3-4: JP2 Jumper Settings

3.6 CPU and CPU Cooler Installation

3.6.1 CPU Installation

WARNING!

CPUs are expensive and sensitive components. When installing the CPU,

please be careful not to damage it in anyway. Make sure to install it properly

and ensure that a heat sink and CPU cooling fan is properly installed before

running the CPU card or else both the CPU and the board will be damaged.

To install an Intel 479-pin CPU onto the motherboard, follow the steps below:

Step 1:

Unlock the CPU retention screw.

When shipped, the retention screw of the

CPU socket should be in the unlocked position. If it is not in the unlocked

position, use a screwdriver to reposition the screw in an unlocked position. (See

Figure 3-5

)

Page 55

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands