IEI Technology PPC-3708 User Manual Download Page 122

Page: 122 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

BIOS Menu 18:SouthBridge Chipset Configuration

OnBoard AC97 Audio DEVICE

The

OnBoard AC97 Audio DEVICE

option enables or disables the AC’97 CODEC.

Auto D

EFAULT

The onboard AC’97 automatically detected and enabled

Disabled

The onboard AC’97 is disabled

Restore on AC Power Loss [Last State]

The Restore on AC Power Loss BIOS option specifies what state the system returns to if

there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

The system turns on

Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

4.8 Power Key

The

Power

menu (

BIOS Menu 19

) allows the advanced power management options to be

configured.

Page 122

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands