IEI Technology PPC-3708, User Manual

Page: 77 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
rack/cabinet bracket until the rear side of the LCD screen frame is flush against
the front of the bracket.
Step 3:
Make sure the retention screw holes at the rear of the LCD screen are aligned
with the retention screw holes in the rack/cabinet bracket.
Step 4:
Secure the rack/cabinet bracket to the PPC-3712 flat panel PC by inserting the
retention screws (
Figure 3-33
).
Figure 3-33: Secure the PPC-3710/PPC-3712 Rack/Cabinet Bracket
Step 5:
Follow the
Step 4
and
Step 5
of the PPC-3708 Cabinet and Rack Installation
procedures to complete the whole installation process.
Step 0:
3.10 Rear Panel Connectors
3.10.1 LCD Panel Connection
To connect the flat panel PC to a second monitor, a conventional CRT VGA monitor
connector is located on the bottom panel. This panel is a 15-pin, female D-SUB connector.
NOTE:
To use the dual screen option, please configure this option in the
Intel
®
Extreme Graphics
configuration program. To do this, after Windows has
Page 77