IEI Technology PPC-3708, User Manual

Page: 48 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
3.1 Installation Precautions
When installing the flat panel PC, please follow the precautions listed below:
Power turned off
: When installing the flat panel PC make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
Certified Engineers
: Only certified engineers should install and modify
onboard functionalities.
Mounting
: The flat panel PC is a heavy device. When mounting the system
onto a rack, panel, wall or arm please make sure that at least two people are
assisting with the procedure.
Anti-static Discharge
: If a user open the rear panel of the flat panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.2 Preinstalled Components
The following components are all preinstalled.
Motherboard
TFT LCD screen
512MB DDR400 SODIMM memory
Power switch
Preinstalled OEM customizations may include the following.
2.5” HDD
Resistive type touch screen
Power module
CD drive (PPC-3712 Only)
Installation of some of the components are described in
the following sections.
3.3 Installation and Configuration Steps
The following installation steps must be followed.
Page 48