IEI Technology PPC-3708 User Manual Download Page 73

Page: 73 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

Figure 3-28: Tighten the Panel Mounting Clamp Screws (PPC-3712)

3.9.3 Arm Mounting

The flat panel PC is VESA (Video Electronics Standards Association) compliant and can

be mounted on an arm with a 100mm interface pad. To mount the flat panel PC on an arm,

please follow the steps below.

Step 1:

The arm is a separately purchased item. Please correctly mount the arm onto

the surface it uses as a base. To do this, refer to the installation documentation

that came with the mounting arm.

NOTE:

When purchasing the arm please ensure that it is VESA compliant and that

the arm has a 100mm interface pad. If the mounting arm is not VESA

compliant it cannot be used to support the flat panel PC.

Step 2:

Once the mounting arm has been firmly attached to the surface, lift the flat panel

PC onto the interface pad of the mounting arm.

Step 3:

Align the retention screw holes on the mounting arm interface with those in the

Page 73

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands