IEI Technology PPC-3708, User Manual

Page: 56 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
Figure 3-5: Make sure the CPU socket retention screw is unlocked
Step 2: Inspect the CPU socket
Make sure there are no bent pins and make sure the
socket contacts are free of foreign material. If any debris is found, remove it with
compressed air.
Step 3: Orientate the CPU properly
. Make sure the IHS (Integrated Heat Sink) side is
facing upward.
Step 4: Correctly position the CPU.
Match the Pin 1 mark with the cut edge on the
CPU socket.
Step 5: Align the CPU pins.
Carefully align the CPU pins with the holes in the CPU
socket.
Step 6: Insert the CPU.
Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly
Step 7: Lock the retention screw.
Rotate the retention screw into the locked position.
(See
Figure 3-6
)
Step 0:
Page 56