IEI Technology PPC-3708 User Manual Download Page 2

Page: 2 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

REVISION HISTORY

Title

PPC-3708/3710/3712 Flat Panel PC User Manual

Revision Number

Description

Date of Issue

1.0

Initial release

December 2006

ABOUT THIS MANUAL

This document covers the description and installation instructions for the PPC-3708,

PPC-3710, and PPC-3712 flat panel PC.

COPYRIGHT NOTICE

This document is copyrighted 2006, by IEI Technology Corp. All rights are reserved. IEI

Technology Corp. reserves the rights to alter the products described in this manual at any

time without prior notice.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

Information provided in this manual is intended to be accurate and reliable. However, IEI

Technology Corp. assumes no responsibility for use of this manual, nor for any

infringements upon the rights of third parties, which may result from such use.

TRADEMARKS

Intel is a registered trademark of Intel Corporation. AMI is registered trademarks of

American Megatrends Inc. Other product names mentioned herein are used for

identification purposes only and may be trademarks and/or registered trademarks of their

respective owners.

Page 2

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands