IEI Technology PPC-3708, User Manual

Page: 59 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
on the motherboard. Carefully route the cable and avoid heat generating chips
and fan blades. (See
Figure 3-9
)
Step 0:
Figure 3-9: Connect the cooling fan cable
NOTE:
A 512MB SODIMM memory module is already preinstalled on the solder
side of the motherboard. After installing the CPU and CPU cooler (if
necessary), the panel PC shall be able to run properly.
3.7 HDD Installation
3.7.1 PPC-3708 HDD Installation
To install the HDD into the PPC-3708, please follow the steps below:
Step 1:
Remove the back cover. See
Section 0
above.
Step 2:
Remove the HDD bracket from the PPC-3708. The HDD bracket is attached on
the PPC-3708 with four retention screws, two on the top panel (
Figure 3-10
) and
two inside the chassis (
Figure 3-11
). Remove the four retention screws and lift
the bracket off the panel PC.
Page 59