IEI Technology PPC-3708 User Manual Download Page 76

Page: 76 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

Figure 3-32: Install into a Rack/Cabinet

Step 5:

Once the PPC-3708 flat panel PC with the attached rack/cabinet bracket has

been properly inserted into the rack or cabinet, secure the front of the

rack/cabinet bracket to the front of the rack or cabinet (

Figure 3-32

Step 0:

3.9.4.2 PPC-3710/PPC-3712 Cabinet and Rack Installation

Step 1:

The back of the aluminum frame surrounding the PPC-3710/PPC-3712 TFT

LCD screen has retention screw holes (PPC-3710 has 10 holes and PPC-3712

has 8 holes) for a cabinet/rack installation bracket.

NOTE:

When purchasing the cabinet/rack installation bracket make sure it is

compatible with both the PPC-3710/PPC-3712 flat panel PC and the

rack/cabinet into which the PPC-3710/PPC-3712 is installed.

Step 2:

Slide the rear chassis of the PPC-3710/PPC-3712 flat panel PC through the

Page 76

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands