IEI Technology PPC-3708 User Manual Download Page 127

Page: 127 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

Ignore

The system does not monitor the primary master IDE

device and does not rouse the system from a sleep or

suspend state when an IRQ is detected.

Monitor D

EFAULT

The system monitors the primary master IDE device and

rouses the system from a sleep or suspend state when

an IRQ is detected.

Primary slave IDE [MONITOR]

The

Power Management/APM

option must be enabled in order to change this

configuration option. The

Primary Slave IDE

option enables monitoring of activity of the

primary slave IDE device and rouses the system from a sleep or suspend state.

Ignore

The system does not monitor the primary slave IDE

device and does not rouse the system from a sleep or

suspend state when an IRQ is detected.

Monitor D

EFAULT

The system monitors the primary slave IDE device and

rouses the system from a sleep or suspend state when

an IRQ is detected.

Secondary master IDE [MONITOR]

The

Power Management/APM

option must be enabled in order to change this

configuration option. The

Secondary Master IDE

option enables monitoring of activity of

the secondary master IDE device and rouses the system from a sleep or suspend state.

Ignore

The system does not monitor the secondary master IDE

device and does not rouse the system from a sleep or

suspend state when an IRQ is detected.

Monitor D

EFAULT

The system monitors the secondary master IDE device

and rouses the system from a sleep or suspend state

Page 127

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands