background image

Table of Contents

General Information   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
Receiving and Handling   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
Pre-Installation Guidelines   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Electrical Guidelines  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Installation    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3-10
Setup & Operation for AMD-xx-TD Series 
Dampers  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3
 AMD-xx-TD Series Damper without a Factory 
Supplied Controller    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
 AMD-xx-TD Series Ordered with a Factory 
Supplied Actuator    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4-5
      Analog FactorySupplied Controller   .  .  .  .  .  .  .  .  . 4
      BACnet Enabled Factory Supplied Controller   5
Setting the Actuator/Controller’s BACnet 
Configuration   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6-9
 Optimal Placement for AMD-xx-TD  .  .  .  .  .  .  .  .  .10-11
Minimum Installation Requirements  .  .  .  .  .  .  .  .  .  .  . 12
Maintenance  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12
Warranty  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12
Our Commitment   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12

Receiving and Handling

Upon receiving dampers, check for both obvious 
and hidden damage . If damage is found, record all 
necessary information on the bill of lading and file 
a claim with the final carrier . Check to be sure that 
all parts of the shipment, including accessories, are 
accounted for . 
Dampers must be kept dry and clean . Indoor storage 
and protection from dirt, dust, and the weather is 
ideal . Do not store at temperatures in excess of  
100°F (37°C) .

1

Air Measuring Dampers: AMD-xx-TD Series

Installation, Operation and Maintenance Manual

Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, 
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure 
to comply with these instructions will result in voiding of the product warranty and may result in personal injury 
and/or property damage.

Document Number 478799 

AMD-xx-TD Series

®

Summary of Contents for AMD-42-TD













Reviews: