80
Standard Master User Functions | IDS X Series Training V2.3
Option 21 - Adding Remotes -Advanced Method
The advanced method allows each button to be taught to different user codes as an arm / disarm button.
Management button is the button that you are teaching to a user code to be the arm / disarm button for
that user code.
Example:
IDS Remote Transmitter button number assignment:
Option 22 - Deleting Remote Transmitters
Each remote transmitter is assigned to a user code, therefore to delete a remote transmitter the user
code must be entered.
Example:
Instruction
Key presses
All user codes must be added into the system before
Press and hold the [*] key for 3 seconds
[*]
Enter the master code followed by the [*] key
[1][2][3][4] [*]
Enter the value to add remotes using the advanced method, followed by the [*] key
[2][1] [*]
Enter the remote receiver ID that the transmitter will be taught to, followed by the [*] key
[1] [*]
Now enter the user code, followed by the [*] key
[2][3][6][5] [*]
Enter the management button number, followed by the [*] key
[1] [*]
Press the [*] key when ready to teach remote transmitter
[*]
Press the button on the remote transmitter that will belong to that management button
number until the beep
When complete press the [#] key
[#]
This will leave you in the master menu
Instruction
Key presses
Press and hold the [*] key for 3 seconds
[*]
Enter the master code, followed by the [*] key
[1][2][3][4] [*]
Enter the value to delete a remote transmitter, followed by the [*] key
[2][2] [*]
Enter the remote receiver ID that the transmitter is to be taught to, followed by the [*] key
[1] [*]
Now enter the user code, followed by the [*] key
[2][4][6][8] [*]
When complete press the [#] key
[#]
This will leave you in the remote receiver menu
Button 1
Button 2
Button 3
Button 4
