76
Standard Master User Functions | IDS X Series Training V2.3
Option 0 - Adding User Codes
User codes can be added sequentially or via slot numbers. Option 0 adds users sequentially as you type
them in. If a user codes have been deleted previously and this option is used the first empty slot will be
filled, then the next.
Example:
Option 1 - Changing a User Code
To change a user code using option 1 the original user code must be known.
Example:
Instruction
Key presses
Press and hold the [*] key for 3 seconds
[*]
Enter the master code followed, by the [*] key
[1][2][3][4] [*]
Enter the value to change a user code, followed by the [*] key
[1] [*]
Now enter a new user code, followed by the [*] key
[5][8][7][9] [*]
When complete press the [#] key
[#]
This will leave you in the master menu
Option 2 - Deleting a User Code
To delete a user code the original code must be known or option 4 can be used if the slot number is
known.
Example:
Instruction
Key presses
Press and hold the [*] key for 3 seconds
[*]
Enter the master code followed by the [*] key
[1][2][3][4] [*]
Enter the value to delete a user code, followed by the [*] key
[2] [*]
Now enter the user code to be deleted, followed by the [*] key
[5][8][7][9] [*]
When complete press the [#] key
[#]
This will leave you in the master menu
Option 3 - Add a User Code to a Specific Slot
A slot is the memory location a user code is saved to. Slot 1 = user 1 up to Slot 128 = user 128.
Example:
Instruction
Key presses
Press and hold the [*] key for 3 seconds
[*]
Enter the master code followed by the [*] key
[1][2][3][4] [*]
Enter the value to add a user code to a specific slot, followed by the [*] key
[3] [*]
Enter the slot number, followed by the [*] key
[8][7] [*]
Now enter the user code to be deleted, followed by the [*] key
[2][5][8][0] [*]
When complete press the [#] key
[#]
This will leave you in the master menu
Instruction
Key presses
Press and hold the [*] key for 3 seconds
[*]
Enter the master code, followed by the [*] key
[1][2][3][4] [*]
Enter the value to add a user code, followed by the [*] key
[0] [*]
Now enter a new user code, followed by the [*] key
[5][8][7][9] [*]
Keep adding the rest of the codes in the same manner
[3][2][3][2] [*]
[2][2][3][4] [*]
[1][5][9][0] [*]
When complete press the [#] key
[#]
This will leave you in the master menu
