IDS X Series Training V2.3 | Standard Master User Functions
79
Adding Remote Transmitters
The system can be installed with four remote receivers and each will be allocated an ID. This is very
important as learning a remote transmitter must be done to a specific remote receiver.
There are two ways to learn remote transmitters to a user code:
1.
Standard method menu option 20
a.
The standard method allocates default settings to each transmitter taught
2.
Advanced method menu option 21
a.
Most setting have to be done during the programming of the remote
Options
Summary of Programmable Options
Option 20 Allows for the basic adding of remotes.
Option 21 Allows for the advanced adding of remotes.
Option 22 Allows for the deletion of remotes.
Option 23 Allows for the changing of the button properties.
Option 24 Allows for the changing of the relay properties.
Option 25 Allows for the changing of the relay pulse time.
Option 26 Allows for the defaulting of the receiver.
Option 27 Allows for the identification of the receiver.
Option 28 Allows for the testing of the receiver.
Option 29 Allows for the viewing of the receiver capacity.
Option 20 – Adding Remotes -Standard Method
Each remote taught using the standard method will have default settings allocated to it.
Example:
Default Button Assignment:
Button 1 = Arm / Disarm
Button 3 = Stay Arm
Any button held down for more than three seconds will cause a panic to trigger
Instruction
Key presses
All user codes must be added into the system before
Press and hold the [*] key for 3 seconds
[*]
Enter the master code, followed by the [*] key
[1][2][3][4] [*]
Enter the value to add remotes using the standard method, followed by the [*] key
[2][0] [*]
Enter the remote receiver ID that the transmitter will be taught to, followed by the [*]
key
[1] [*]
Now enter the user code, followed by the [*] key
[2][3][6][5] [*]
Press the [*] key when ready to teach the remote transmitter
[*]
Press a button on the remote transmitter until the beep
When complete press the [#] key
[#]
This will leave you in the master menu
Arm / Disarm
Stay Arm
