FDX-S Series User Guide
66
10.7.2 Horizontal active area
Menu
Top
→
INPUT TIMING
→
H ACTIVE
Setting for
IN01 to INn for each input signal
Setting value -100DOT to +100DOT [Default] 0DOT
You can set the horizontal active area of input video.
For horizontal settings, the total number of horizontal pixels must be greater than the number representing
the horizontal active area. Manually entered settings will be automatically limited to be within the FDX-S
’s
accepted value range.
10.7.3 Vertical start position
Menu
Top
→
INPUT TIMING
→
V START POSITION
Setting for
IN01 to INn for each input signal
Setting value -30LINE to +30LINE [Default] 0LINE
You can set the vertical start positions of input video.
If the set value exceeds the limitation mentioned below, the display start position will be set automatically to
a value within the parametric limitation.
The total number of vertical lines > Vertical active area > Vertical start position
10.7.4 Vertical active area
Menu
Top
→
INPUT TIMING
→
V ACTIVE
Setting for
IN01 to INn for each input signal
Setting value -30LINE to +30LINE [Default] 0LINE
You can set the vertical active area of input video.
For vertical settings, the total number of vertical lines must be greater than the number representing the
vertical active area. Manually entered settings will be automatically limited to be within the FDX-
S’s accepted
value range.
Scan conversion output only
Scan conversion output only
Scan conversion output only
