IDK FDX-S Series, User Manual

Page: 64 / 117

FDX-S Series User Guide
64
10.6.3 HDBaseT input long reach mode
Menu Top
→
INPUT SETTINGS
→
HDBT LONG REACH MODE
Setting for ALL, IN01 to INn
Setting value OFF : Long reach mode disabled. Up to 328 ft. (100 m) [Default]
ON : Long reach mode enabled. Up to 492 ft. (150 m)
With long reach mode, up to 1080p (24 bit)/dot clock 148 MHz is supported when using with IDK’s HDBaseT
product. Set the FDX-S
’s EDID to 1080p or less or set the connected device’s output to a supported signal
format.
【
See: 10.11.2 Resolution
】
【
See: 10.11.6 Deep Color
】
10.6.4 SDI input audio group
Menu Top
→
INPUT SETTINGS
→
SDI AUDIO GROUP
Setting for IN01 to INn
Setting value PRI : 1 to 4 [Default: 1]
SEC : 1 to 4 [Default: 2]
1: Audio group (1ch to 4ch)
2: Audio group (5ch to 8ch)
3: Audio group (9ch to 12ch)
4: Audio group (13ch to 16ch)
Up to 16 audio channels are in SDI input audio, and these channels are divided into one to four groups by
four channels. Two selected audio groups can be output as multi-channel audio. The eight channels are
divided in half and specified as primary or secondary audio. This function sets SDI input audio group that is
assigned to primary and secondary.
Press the
“MENU/ENTER” button to apply the setting.
10.6.5 3G-SDI Dual Stream input video
Menu Top
→
INPUT SETTINGS
→
3G-SDI DUAL STREAM
Setting for IN01 to INn
Setting value STREAM 1: Video stream 1 [Default]
STREAM 2: Video stream 2
Two video streams are included when 3G-SDI Dual Stream signals are input. You can select one stream
to be output.
HDBaseT input only
SDI input only
SDI input only