FDX-S Series User Guide
62
10.6 Input
Settings for video input and input connectors
10.6.1 No-signal input monitoring
Menu
Top
→
INPUT SETTINGS
→
NO INPUT MONITORING
Setting for
ALL, IN01 to INn
Setting value OFF, 3Sec to 15Sec (by 1Sec) [Default] 10Sec
If you change the EDID settings of the FDX-S or power the FDX-S off/on, the source device may not output a
video signal. Use this menu to set the monitoring time. This is the interval beginning when a source device is
not outputting a signal; and ending at the point when the FDX-S requests an output from that source device.
Changing EDID
ON
OFF
Requesting source device to
output video signal
Monitoring
Hot plug
ON
OFF
Video signal from
source device
[Fig. 10.7] Monitoring absence of input
Notes:
・
If you are using the monitor power-saving or dual monitor features on your
PC, set this feature to “OFF”.
This will avoid potentially unpredictable operation.
・
When using this feature, ensure that the “monitoring time” is set for a value greater than the amount of
time needed for the source to provide an output signal.
[Fig. 10.8] Repeating output reset
Boards other than SDI
Changing EDID
Monitoring
ON
OFF
Monitoring
Monitoring
Outputting source device
’
s video
Video signal from
source device
Requesting source device to output signal
