IDK FDX-S Series, User Manual

Page: 68 / 117

FDX-S Series User Guide
68
10.8.4 Output video correction initialization
Menu Top
→
PICTURE ADJUSTMENT
→
OUTPUT SETTING INIT.
Setting for ALL, OUT01 to OUTn
Setting value OFF [Default],
INITIALIZE: Initializes the following settings of output video:
10.8.1 Output brightness
10.8.2 Output contrast
10.8.3 Output gamma
Press the
“MENU/ENTER” button to apply the setting, and you will hear a long beep sound.
10.8.5 Input sharpness
Menu Top
→
PICTURE ADJUSTMENT
→
INPUT SHARPNESS
Setting for IN01 to INn for each input signal
Setting value -5 to 15 [Default] 0 NORMAL
You can set the desired level of sharpness for each input signal.
10.8.6 Input brightness
Menu Top
→
PICTURE ADJUSTMENT
→
INPUT BRIGHTNESS
Setting for IN01 to INn for each input signal
Setting value 0% to 200% [Default] 100%
You can set the brightness level for each input signal.
10.8.7 Input contrast
Menu Top
→
PICTURE ADJUSTMENT
→
INPUT CONTRAST
Setting for IN01 to INn for each input signal
Setting value R/G/B: 0% to 200% [Default] R/G/B: 100%
You can set the contrast for the input video image.
Select
“A” to change the settings of “R”, “G” and “B” relatively from the current setting values.
Scan conversion output only
Scan conversion output only
Scan conversion output only
Scan conversion output only