FDX-S Series User Guide
106
11.5 FDX-SIV4H
Item
Description
Input
4 inputs
Video
HDMI/DVI
HDMI/DVI 1.0
TMDS single link, HDCP 1.4
TMDS clock: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 9 Gbps
36 bit Deep Color
x.v.Color/3D/ARC/HEC/CEC/HDR are not supported.
EDID emulation
Format
VGA to 4K (Dot clock: 25 MHz to 300 MHz)
For WUXGA/QWXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
For 4K format, 24 Hz/25 Hz/30 Hz are supported.
Audio
Digital
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input level: 0 dBFS
Connector
Female HDMI Type A (19-pin)
Maximum transmission distances
98 ft. (30 m) (1080p@60), 66 ft. (20 m) (4K@30) (*1)
General
Power consumption
About 11 Watts
Weight
0.7 lbs. (0.3 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・
1080p@60 : When IDK
’s 24 AWG cable was used and signals of 1080p@60 24 bit/pixel (8 bit/component) was input.
・
4K@30 : When IDK
’s 24 AWG cable was used and signals of 4K@30 24 bit/pixel (8 bit/component) was input.
The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations,
cabling method, or other manufacturer’s
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
11.6 FDX-SIV4T
Item
Description
Input
4 inputs
Video
HDBaseT
HDBaseT
HDCP 1.4
36 bit Deep Color
For WUXGA, QWXGA, and 4K@24/25/30 (4:4:4), Deep Color is not supported.
x.v.Color/3D/ARC/HEC/CEC/HDR are not supported.
EDID emulation, RS-232C, LAN
Format
VGA to 4K (Dot clock: 25 MHz to 300 MHz)
For WUXGA/QWXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
For 4K format, 24 Hz/25 Hz/30 Hz are supported.
Audio
Digital
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input level: 0 dBFS
Connector
RJ-45 (*1)
Cable
CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (T568A/T568B straight-through)
Maximum transmission distances
328 ft. (100 m), 492 ft. (150 m) (Long reach mode is used) (*2)
General
Power consumption
About 30 Watts
Weight
1.1 lbs. (0.5 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
RJ-45 (HDBaseT
connector) is only for extending digital video and audio signals over a Cat5e/Cat6 cable. Use it with IDK’s HDBaseT Products. Do not use for LAN devices.
*2
The maximum transmission distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling
method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
The maximum transmission distance is the shorter distance of co
nnected HDBaseT product or sink device’s maximum transmission distance.
Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s HDBaseT Products that supports 328 ft. (100 m) or longer.
