FDX-S Series User Guide
110
11.13 FDX-SOV4TS
Item
Description
Output
4 outputs
Video
HDBaseT
HDBaseT
HDCP 1.4
30 bit Deep Color
x.v.Color/3D/ARC/HEC/CEC/HDR are not supported.
RS-232C, LAN
Format (*1)
VGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA /
WXGA (1360x768) / WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ /
VESAHD / WUXGA / QWXGA
For VESAHD/WUXGA/QWXGA, only Reduced Blanking is supported.
480p / 576p / 720p / 1080i / 1080p
For 720p, 1080i, and 1080p, 50 Hz/59.94 Hz are supported.
Audio
Digital
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector
RJ-45 (*2)
Cable
CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (T568A/T568B straight-through)
Maximum transmission distances
328 ft. (100 m), 492 ft. (150 m) (Long reach mode is used) (*3)
Functions
Scan Converter
Motion adaptive interlaced/progressive conversion, Aspect ratio control,
Picture adjustment (brightness, contrast, image position, image size, etc.), Seamless Switching
Others
Videowall output, Lip Sync (Max. 256 ms.), Anti-snow, Connection Reset (*4)
General
Power consumption
About 40 Watts
Weight
1.8 lbs.(0.8 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
Input resolution: VGA to QWXGA and 480i/480p/576i/576p/720p/1080i/1080p are supported.
*2
RJ-45 (
HDBaseT connector) is only for extending digital video and audio signals over a Cat5e/Cat6 cable. Use it with IDK’s HDBaseT Products. Do not use for LAN devices.
*3
The maximum transmission distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling
method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
The maximum transmission distance is the shorter distanc
e of connected HDBaseT product or sink device’s maximum transmission distance.
Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s HDBaseT Products that supports 328 ft. (100 m) or longer.
*4
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However,
the Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the FDX-S
’s output. If other devices are connected between the FDX-S’s output and sink device, this
feature may be invalid.
11.14 FDX-SOV4UH
Item
Description
Output
4 outputs
Video
HDMI/DVI
HDMI/DVI 1.0
TMDS single link, HDCP 1.4/2.2
TMDS clock: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 18 Gbps
36 bit Deep Color, x.v.Color, 3D, HDR
ARC/HEC/CEC are not supported.
Format
VGA to 4K (Dot clock: 25 MHz to 600 MHz)
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
For 4K format, 24 Hz/25 Hz/30 Hz/50Hz (4:4:4)/60 Hz (4:4:4) are supported.
Audio
Digital
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector
Female HDMI Type A (19-pin)
Maximum transmission distances
98 ft. (30 m) (1080p@60), 39 ft. (12 m) (4K@60) (*1)
Functions
Anti-snow, Connection Reset (*2)
General
Power consumption
About 11 Watts
Weight
0.7 lbs. (0.3 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・
1080p@60 : When IDK
’s 24 AWG cable was used and signals of 1080p@60 24 bit/pixel (8 bit/component) was output.
・
4K@60 : When IDK
’s 18 Gbps supported cable was used and signals of 4K@60 24 bit/pixel (8 bit/component) was output.
The maximum cable distance depends on the con
nected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
*2
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However,
the Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the FDX-S
’s output. If other devices are connected between the FDX-S’s output and sink device, this
feature may be invalid.
