IDK FDX-S Series, User Manual

Page: 61 / 117

FDX-S Series User Guide
61
10.4.11 Presence of output signal for when no signal is input (No scan
conversion)
Menu Top
→
OUTPUT SETTINGS
→
DDC POWER OUT
Setting for ALL, OUT01 to OUTn
Setting value ON [Default], OFF
If setting to “ON”, the +5V signal is output regardless of the presence of input signal, some sink devices are
not in standby mode.
10.5 Input position, size, and cropping
Settings for input video
10.5.1 Aspect ratio
Menu Top
→
INPUT IMAGE
→
ASPECT RATIO
Setting for IN01 to INn for each input signal
Setting value
[Table 10.6] Restoring aspect ratio (For input signal)
Setting value TV signal PC signal
AUTO [Default] Follows sink device aspect ratio and its setting automatically.
FULL Provides a full screen output
4:3 4:3 Follows input signal aspect ratio
5:3 5:3
5:4 5:4
16:9 16:9
16:10 16:10
16:9 LT 16:9 LETTER BOX
You can set the aspect ratio for each video input.
If no signal is input,
“No Signal” is displayed on the front display.
【
See: 10.3.2 Aspect ratio for sink device
】
Scan conversion output only