5. Setting up the device
33
Menu level
Parameterisation level
Totaliser state,
total:
Default:
off
The totaliser makes measurements on a time base of e.g. l/h possible, at this the scaled input
signal is integrated by a time and steadily (select
Stead
) or temporarily (select
temp
) saved.
Select the constant storage for consumption measurements and the quick storage for
frequently filling processes. If
Off
is selected, the function is deactivated. With
[P]
the selection
is confirmed and the device changes into menu level.
Time base,
t.base:
Default:
sec
Under this parameter the time base of the measurement can be preset in seconds, minutes or
hours.
Totaliser factor,
Facto
:
Default:
1e0
At this, the factor (1E0…1E6) respectively the divisor for the internal calculation of the
measuring value is assigned.
Setting up the decimal point for the totaliser,
tot.dt:
Default:
0
The decimal point of the device can be adjusted with the navigation keys
[
▲
] [
▼
]
. With
[P]
the
selection is confirmed and the device changes into menu level.
Menu group level
5.4.9. Totaliser (Volume metering)
Menu level
…
