5. Setting up the device
20
Menu level
Parameterisation level
Display,
dISPL:
Default:
Actua
With this function the current measuring value, min/max value, totaliser value, the process-
controlled hold value, the sliding average value, the constant value or the difference between
the constant value and the current value can be allocated to the display. With
[P]
the selection
is confirmed and the device changes into menu level.
Brightness control,
Light
:
Default:
10
The brightness of the display can be adjusted in 16 levels from 00 = very dark to 15 = very
bright via this parameter or alternatively via the navigation keys from the outside. During the
start of the device the level that is deposited under this parameter will always be used, even
though the brightness has been changed via the navigation keys
[
▲
] [
▼
]
in the meantime.
Display flashing,
FLASH:
Default:
no
A display flashing can be added as additional alarm function either to single or to a combination
of off-limit condition. With
no
, no flashing is allocated.
