Contents
1
1.
Brief description
2
2.
Assembly
3
3.
Electrical connection
4
4.
Description of function and operation
6
4.1. Programming software PM-TOOL
8
5.
Seting up the device
8
5.1. Switching on
8
5.2. Standard parameterisation (flat operation level)
8
Value assignment for the triggering of the signal input of the digital display and bargraph display
5.3. Programming interlock
„RUN“
12
Activiation/Deactivation of the programming interlock or change into professional operation level
respectively back into flat operation level
5.4. Extended parameterisation (professional operation level)
14
5.4.1. Signal input parameters „
INP
“
14
Value assignment for the triggering of the signal input incl. linearisation of the digital display and
the bargraph display
5.4.2. General device parameters „
FCT
“
18
Superior device functions like Hold, Tara, min/max permanent, setpoint value function /
nominal value function, averaging, brightness control, as well as the control of the digital input and
keyboard layout
5.4.3. Bargraph functions „
bar
“
23
Assignment of the bargraph to superior functions like min/max, totaliser, Hold or
sliding averaging
5.4.4. Safety parameters „
Cod
“
25
Assignment of user and master code for locking respectively for access to defined parameters
like e.g. analog output and alarms, etc.
5.4.5. Serial parameters „
SER
“
26
Parameters for the definition of the interface
5.4.6. Analog output parameters „
Out
“
27
Analog output functions
5.4.7. Relay functions „
rel
“
29
Parameters for the definition of the setpoints
5.4.8. Alarm parameters „
AL1…AL4
“
31
Trigger and dependencies of the alarms
5.4.9. Totaliser (Volume metering) „
tot
“
33
Parameters for the calculation of the sum function
6.
Reset to factory settings
31
Reset parameters to delivery state
7.
Alarms / Relay
32
Functional principle of the switching outputs
8.
Interfaces
36
Connection RS232 and RS485
9.
Programming examples
37
Examples of use e.g. the calculation of the input frequency or the adjustment of unknown
rotational speed
10.
Technical data
39
11.
Safety advices
40
12.
Error elimination
41