5. Setting up the device
26
Menu level
Parameterisation level
Back to menu group level,
rEt
:
With
[P]
the selection is confirmed and the device changes into menu group level
„–COD–“
.
Menu group level
5.4.5. Serial parameters
Menu level
Menu level
Parameterisation level
Device address,
ADDR
:
Default:
001
The device address is adjusted from the smallest to the largest digit with the navigation keys
[
▲
] [
▼
]
and confirmed digit per digit with
[P]
. A device address up to max. 250 is available.
Interface data: Baudrate 9600 bit/s, 8 databyte, 1 stopbit, no parity (8n1).
ModBus operation type,
b.mode
:
Default:
ascii
In preparation.
Timeout,
tIout
:
Default:
000
The monitoring of the data transfer is parameterised in seconds up to max. 100 seconds; there
is no monitoring with an input of
000
. The timeout is adjusted from the smallest to the largest
digit with the navigation keys
[
▲
] [
▼
]
and confirmed digit per digit with
[P]
. After the last digit
the device changes back into menu level.
Back to menu group level,
rEt
:
With
[P]
the selection is confirmed and the device changes into menu group level
„–SER–“
.
