13
5. Setting up the device
Menu level
Parameterisation level
Master code (4-digit number-combination free available),
A.CodE
:
Default:
1234
This code can unlock all parameters, if
LOC
has been activated before under menu item
run
. By
pushing
[P]
during operation mode for approx. 3 seconds,
Code
appears in the display. The user
can now reach all parameters by entering
A.codE
. Leaving the parameterisation, under menu
item
run
, the user can unlock them permanently by choosing
ULOC
or
ProF
. So, there is no need
for anew code entering, even by pushing
[P]
during operation mode again.
5.3. Programming interlock „
run
“
Activation / deactivation of the programming lock or completion of the standard
parameterisation with change into menu group level (complete function range),
run:
Default:
uloc
Use the navigation keys
[
▲
] [
▼
]
to choose between the deactivated key lock
Uloc
(works
setting) and the activated key lock
Loc
, or the menu group level
ProF
. Confirm the selection with
[P]
. After this, the display confirms the settings with
"
- - - - -"
and switches automatically to
operating mode. If
Loc
was selected, the keyboard is locked. To get back into the menu level,
press
[P]
for 3 seconds in operating mode. Now enter the
CODE
(works setting
1 2 3 4
) that
appears using
[
▲
] [
▼
]
plus
[P]
to unlock the keyboard.
FAIL
appears if the input is wrong.
To parameterise further functions
ProF
needs to be set. The device confirms this setting with
„
- - - - -
„
and changes automatically into operation mode. By pressing
[P]
for approx. 3 seconds
in operation mode, the first menu group
InP
is shown in the display and thus confirms the
change into the extended parameterisation. It stays activated as long as
ULOC
is entered in
menu group
RUN
, thus the display is set back in standard parameterisation again.
