2-6
2
1
entered from the GPIBkybd program or as part of the user's
program.
After the last selection, the program will ask if the unit is configured
correctly. Enter N to go back and change the configuration; Y to
continue.
10.
Saving the New Settings
The program will ask if you want to save the current configuration.
Enter Y to save; N to continue.
The program may ask if you want to lock the interface configuration
parameters from being changed by the end user. Enter Y to lock;
N to continue.
11.
Configuring other units
The program will ask if you want to configure another unit. Enter
Y to configure another unit; N to exit.