1-16
1
1.7
CONFIGURABLE FUNCTIONS
Table 1-3 lists the 4863's configuration parameters and their factory
settings. Table 1-4 lists the 2363's factory settings. The configuration
parameters are saved in nonvolatile Flash memory.
TABLE 1-3 4863 CONFIGURATION PARAMETERS
Command
Function Factory Setting
:ADDRESS
Sets 4863's GPIB bus address
4
:EXTernal
Enables external address switch
OFF #
:MODE
Sets GPIB address mode
SINGle
:INPut
Sets number of Talk bytes
6 #
:POLarity
Sets Input polarity
1 #
:HANDshake
Enables Input Handshaking
ON #
:TALK
Selects Input Format
HEX #
:TRANslation
Sets input conversion table for BCD
HEX characters
see note #
:OUTput
Sets number of Listen bytes
0 #
:POLarity
Sets Output polarity
1 #
:LISTen
Sets Output Format
HEX #
:HANDshake
Enables Output Handshaking
OFF #
:CLEar
Sets Clear pulse active level
0 #
:EDR
Sets EDR input active level
0 #
:INHibit
Sets Inhibit output active level
1 #
:REMote
Sets Remote output active level
0 #
:RESet
Sets Reset pulse output active level
0 #
:STRobe
Sets Data Strobe pulse active level
0 #
:TRIGger
Sets Trigger pulse active level
0 #
:ASTATus
Sets Status A input active level
1 #
:BSTATus
Sets Status B input active level
0 #
:LOCK
Blocks # items from changes
Off
:IDN
Sets user's IDN message
ICS IDN msg #
:QUES Reg
Enables digital signal changes
0 *
:PTRANSISTION
Enables positive going inputs
All 1s *
:NTRANSISTION
Enables negative going inputs
All 0s *
*ESE
Enables events to generate an SRQ
0
*SRE
Enables Summary bits to generate
0
an SRQ
* Indicates parameters that cannot be saved in the unit's nonvolatile memory.
# Indicates parameters that may be blocked by the LOCK command.
Std Conversion Table is 0123456789ABCDEF.