![background image](http://html1.mh-extra.com/html/icom/ic-i7410/ic-i7410_instruction-manual_4297834041.webp)
34
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Basic transmit operation
Before transmitting, monitor the operating fre-
quency to make sure transmitting won’t cause
interference to other stations on the same fre-
quency. It’s good amateur practice to listen
first, and then, even if nothing is heard, ask “Is
the frequency in use?” once or twice, before
you begin operating on that frequency.
D
Transmitting
CAUTION:
Transmitting without an antenna will
damage the transceiver.
q
Push [PTT] on the microphone to transmit (or
[TRANSMIT] on the transceiver).
• The TX indicator lights red.
w
Release [PTT] to receive (or push [TRANSMIT]
again).
✔
Adjusting the transmit output power
➥
Rotate [RF PWR].
• Adjustable range : 2 W to 100 W
(2 W to 27 W in the AM mode)
Increases
Decreases
D
Microphone gain adjustment
(Mode: SSB/AM/FM)
q
Push [PTT] on the microphone to transmit.
• Speak into the microphone at your normal voice level.
w
In the SSB mode:
While speaking into the microphone, rotate the
[MIC] control so that the ALC meter reading stays
within the ALC zone.
In the AM and FM modes:
While speaking into the microphone, rotate the
[MIC] control with another station listening to your
voice for clarity.
Recommended level for
an Icom microphone
Increases
Decreases
e
Release [PTT] to receive.
[TRANSMIT]
[RF PWR]
TX indicator
ALC zone
[MIC]